Your tube amp is important to keep your acoustics running smooth and sounding great. There are a few things some people do which can cost them a pocketful when it comes to taking care of these amplifiers. A number of tips should be kept in mind to ensure that your machine is kept in great condition as well as to avoid expensive repairs or even replacements.
There should be proper matching when it comes to your speakers and your amplifier; this is highly important and is not something to test around. If you do not match your speaker with your amplifier, it can cause your piece of equipment to stop functioning at an early stage. There are those which are more sensitive - this all depends on what brand you are using.
Problems such as these can be avoided when you use an ohms scale when measuring the voltage. Common problems are that faulty meters tend to measure on the low side. Doing this helps measure the impedance of your cabinet to see if they match the speaker it is wired to.
If you are having problems understanding the concept of the voltage meters, it is advised that you consult with a professional or have your tube amp services by your local dealer who may be offering services such as these. Your amplifier may start to lower its sound quality due to wear and tear; this might also be a good time to call a professional.
An old tube amp may not give out the best sound quality. All this would require is a power-tube replacement. Along with this, you would have to purchase a drive-tube replacement; these two go hand-in-hand and cannot be done separately. It is recommended that you do this over purchasing a new amplifier as it is the cheaper alternative.
Tube-Sockets may suffer from over-use; this is because they are connected to the part of the amplifier experiencing the most voltage. Sockets which are not pinned properly or securely can cause interruption from the speaker and the amplifier connection. If you notice that this socket is starting to corrode, replace it right away!
To keep your tube amp in top condition, you must take good care of it and measure its ohms on a regular basis. There are a few things you can do before and after use to ensure that your amplifier runs well; this can save you a lot of money in the long run!
For more information on a tube amp please visit http://line6.com/
No comments:
Post a Comment