Guitar Kit Construction - How You Can Add A Sunburst Finish

Originally developed to imitate a vintage look (as seen on classic violins and mandolins), sunburst really is a timeless guitar finish regularly seen upon electric guitars classic and cutting edge. It's an extremely desirable look but is it too difficult for the inexperienced? You'll be able to achieve a sunburst finish for your guitar if you decide to stick to just a few steps and take your time and don't rush. It's good to practice to start with a discarded scrap piece of timber prior to moving on to the electric guitar.

If it's a brand new guitar kit, you really should construct your guitar before anything else. As expected you will be pulling it apart to begin the finish but you need to know you won't be finding problems further along that risk the finish you've obviously put such a lot of effort into. When you've put together the electric guitar and analyzed for potential issues you should begin to set up the timber. Sand back until you get an entirely even base to apply your finish. At that point remove excess dust particles and clean the guitar meticulously.

The next step is to smear some wood grain filler. You'll want to apply evenly across the face belonging to the electric guitar and afterward work it in to the grain. Once dried remove the excess and wipe off with a moistened scrap of material. Now it's the time to apply paint to the back and sides of the body and neck of your electric guitar. A crucial factor to remember is to always mask the body and neck area. If you end up spraying it's recommended that you keep your aerosols in warm water before you start using. It will take you a number of coats to get a decent coverage. The trick is to accumulate your guitar's colour layer after layer and apply from a good distance away in order to attain a gentle edge. The nearer you end up getting the more challenging the edge line you will end up with.

After that apply the amber lacquer. You should mask the sides of your guitar after which you'll place the guitar on a dependable workbench faced upwards before you apply the lacquer. Once you have finished this task you should apply the clear coat and then sand between coats to remove any issues. Then apply your next darkest stain to acquire a blend of colour between the edge and middle section. Try to apply particularly lightly and add enough coats to achieve the coverage you wish to attain. At this time you should let the most recent coat harden off. As soon as the guitar is totally free of moisture commence with sanding for a second time.

The key here is to utilise a lighter measure of sandpaper every single time, essentially removing the marks from the gauge of sandpaper used previously. Remember to keep delicately sanding after that changing to a less heavy gauge unless you run out of sandpaper after which you can proceed to your buffer. From this point you should continue to keep buffing or hand polishing until you get completely fine with the finished look.

We hope you enjoyed this article. For more articles just like this covering all aspects of Guitar Kits visit our site at eguitarkits.com

View the original article here

Warning Don't Try This At Home: Leave Steeldrum Construction to the Music Masters

Everyone loves the rhythmic sound of steeldrum (also known as steel pan) bands. During the summer there's not a festival in the entire US, Canada, and UK that does not boast of a steeldrum band included in the music performance lineup. More and more, the sound is used in product branding for anything that is consumed, bought, or used during the summer months. Then the steeldrum sound is used to lure us from the depths of winter and dream of warmer days as advertising reminds us we should start planning for the next summer's vacation. The steeldrum is no longer the once rare instrument to be heard, it is now incorporated into any music that is intended to make you feel happy, carefree, and joyful - a commercial, a movie, or a wedding reception.

Training classes to teach the steeldrum are held in corner mom and pop music stores, community centers, and in top University music programs. Steeldrum bands are sought for major music performance events and steeldrum student corps are becoming more popular in major cities. Through the progression of the instrument and its deep acceptance into music genres and culture there have been major advancements in the construction of the steeldrum. They used to be constructed by a steeldrum music master craftsman from the area of its origination in Trinidad and Tobago. Now it is still a handmade instrument but the process is more streamlined and some parts are more preciously carried out by the help of computerization.

Recently there has been much attention directed at the dangers of one choosing to make an attempt at constructing their own steeldrum. Authorities are hoping the word can be spread of the dangers, especially to young musicians that are most apt to attempt their own construction. The steeldrum is in fact made from an actual steel drum. Cut, shaped, and tuned by shaping of the drum bottom, it is then finely chromed to produce a steeldrum. There are other things steel drums are used for after their use for containment is no longer a desired purpose. People use them for decorative pieces, animal feeders, and gardening containment.

The danger of constructing the steeldrum stems from what the barrel originally contained. Usually oil filled drums are used, but the same type of drum can be used to hold other flammable products as well. Unfortunately deaths and major injuries have occurred as people unknowingly cut into drums, that while empty, and some even attempted to be cleaned, still held flammable vapors. Welding, grinding, or sawing all have the possibility of igniting fumes. Experts say it only takes one-half ounce of residual material to produce enough vapors that when mixed with a spark or heating source could ignite and explode.

Unfortunately many who are uneducated as to the dangers have been seriously injured or killed. Last week, in Ottawa, Canada a young high school student named Eric Leighton, 18 years of age, died after cutting into a metal steel drum in a shop class. The explosion that occurred also injured four other students and the teacher. The drum that was being cut is thought to have contained peppermint oil. The students were not going to make an instrument but were going to cut the drum and use it to make a barbeque grill. The school board has now put a temporary band on students cutting into any drums in which there could possibly have been a combustible substance.

There are many documented cases similar to the one that occurred in Ottawa, so much so that there are specific guidelines produced by organizations, government authorities, and insurance providers and even steeldrum makers warning of the proper cleaning procedures and precautions that must be taken when repurposing a steel drum.

For those that are looking to find an affordable steeldrum, there are used ones that can be found through secondary markets. There are also practice and learning products that are steeldrum-like and provide an affordable choice to begin playing a steeldrum. No matter, the steeldrum instrument construction should be left to the experts, whether from a studio, factory, or the backyard of a master steeldrum maker.

For more great information of the Steelpan instrument you can visit my SteelBand Blog at http://www.caisosteelband.com/

From Michael "The SteelDrum Guy" King Jr.- Caiso SteelBand Music Group

Professional & Fun Musicians for All Occasions.
So whether you're planning a Wedding, Networking Event or Party.
CAISO SteelDrum Band Can Jam!

View the original article here